Stone Finishing

“Vein Cut” and “Cross Cut” are two ways used for cutting the blocks of Peperino. The final effect is very different, so much to think of a different material.

N

Vein Cut

Vein Cut is performed vertically with respect to the quarry surface, thus enhancing the striped features of the stone.

N

Cross Cut

Cross Cut is performed horizontally with respect to the quarry surface and give the stone a typical dapple-grey roundis

Stone Finishing

N

Brush

The surface is rubbed by brushes with several degrees of abrasion in order to get the finishing desired. The final effect is a surface smoothed by the elements and stamping. Working is suitable in particular for interior design.

N

Polish

This type of finishing is performed by water-cooled grinding wheels; if slabs shall be cut to size, they will run on belt; otherwise each slab will be worked separately, according to its final destination. Grain size determines the final result, polished or semi-polished. The polished surface slightly reflects the light and stone colour are emphasized. Surface is uniform and without scratches. This finishing is particularly suitable for paving and interior design.

N

Bush Hammered

The pouding action of the tool develops a textured surface on the stone. The degree of texture can be varied to give a fine, medium or raough appearance. The final result is an anti slip surface, suitable for exterior paving.

Are you interested?

Entra in contatto con i nostri uffici, richiedi la nostra consulenza.

Scrivici

Natural Stones Forever

Micci Srl – Località Fraticani – 01038 Soriano nel Cimino – Viterbo
Telefono 0761-744090 – Fax 0761-747127
P.IVA/Cod. Fisc. IT01460460569 – CAP. SOC. 30.988,00 Euro Int. Vers.
REA VT-88087 – Iscr. Reg. Impr. VT 25/11/1994